
WHAT TO DO IN THE FOLLOWING
CIRCUMSTANCES
Lost RF D.E.S.S. Keys
The RF D.E.S.S key is required to start
the vehicle.
If the key is lost during a ride, the en-
gine will continue without cut or mis-
fire and a the message "CHECK KEY"
will be displayed. You will be able to
stop the engine but you will need the
spare key to restart the vehicle.
See your dealer to buy a new key and
have it programmed.
Flat Tire
If a tire has a
major
puncture or cut in
the tread and is completely deflated,
have the vehicle transported to the
nearest Can-Am On-Road dealer. Re-
fer to
HOW TRANSPORTING THE VE-
HICLE
in this section for transporting
instructions.
If a tire has a
minor
nail or stone punc-
ture and is not completely deflated,
the tire can be temporarily repaired. To
temporarily repair a tire, a self-inflat-
ing tire sealer or tire plug repair kit can
be used. Follow the manufacturer's
instructions that come with the tire
sealer or repair kit and have the tire
repaired or replaced by an authorized
Can-Am On-Road dealer
as soon as
possible
.
When a tire is temporarily repaired,
ride slowly and carefully, and fre-
quently check tire pressure until it is
replaced or permanently repaired.
Dead Battery
If the battery is dead or too low to crank
the engine, it can be jump started.
WARNING
Connect the jumper cables as
specified in the jump start proce-
dure.
Batteries can emit explosive gas
that can ignite if jumper cables are
not properly connected.
NOTICE
Do not disconnect the dis-
charged battery.
1. Park the booster vehicle closed to
the front of your vehicle.
2. Remove the front service cover. Re-
fer to
SERVICE COVERS
section.
3. Remove the positive terminal cover
and clean corrosion from battery
posts before connecting the jumper
cables.
219001998-063
1. BLACK (-) terminal
2. RED (+) terminal
4. Begin by connecting one end of the
RED jump lead to the positive (+) ter-
minal of the discharged battery.
5. Connect the other RED end to the
positive (+) terminal of the booster
vehicle battery.
6. Connect one end of the BLACK
jump lead to the negative (-) terminal
of the discharged battery.
7. Connect the other BLACK end to the
negative (-) terminal of the booster
vehicle battery.
126
______________
Содержание Can-Am RYKER 2019 Series
