
MAINTENANCE PROCEDURES
XPS™ RECOMMENDED COOLANT
Extended life pre-mixed coolant
If THE RECOMMENDED XPS
COOLANT IS NOT AVAILABLE
Use a low silicate, extended life
ethylene-glycol premixed coolant
(50%-50%) specifically formulated for
internal combustion aluminum engines.
Verifying the Engine Coolant Level
WARNING
When opening the reservoir, the
coolant can be very hot and spray
out if the engine is hot. In order
to avoid getting burned, check the
coolant level when the engine is
cold.
With the engine cold,
check the
coolant level as follows:
1. Park the vehicle on a firm, level sur-
face.
2. Remove the front service cover. Re-
fer to
SERVICE COVER
section.
3. Check the coolant level on the right
hand side. Coolant must be visible
slightly above the MIN level mark.
NOTE:
If engine is hot, coolant must
be visible without exceeding the MAX
level mark.
1
2
219001998-155
1. Coolant MIN. level mark
2. Coolant MAX level mark
4. If required, add coolant until it is vis-
ible in the reservoir slightly above
the MIN level mark. Use a funnel to
avoid spillage.
Do not overfill.
5. Reinstall the service cover.
NOTE:
A coolant system that fre-
quently requires coolant indicates
leaks or engine problems. See an au-
thorized Can-Am On-Road dealer.
Replacing the Engine Coolant
Have the engine coolant replaced by
an authorized Can-Am On-Road dealer,
a repair shop, or a person of your own
choosing.
Performing the Cooling System
Pressure Test
Have the pressure test of the cooling
system performed by an authorized
Can-Am On-Road dealer, a repair shop,
or a person of your own choosing.
Final Drive
Recommended Final Drive Oil
XPS™ RECOMMENDED FINAL
DRIVE OIL
75W90 Synthetic gear oil
If THE RECOMMENDED XPS
FINAL DRIVE OIL IS NOT
AVAILABLE
Use a 75W90 gear oil that meets the
API GL-5 specification.
Verifying the Final Drive Oil Level
1. Place the vehicle on a level surface.
2. Stop the engine and move the park
position lever in the locking position.
3. Remove the final drive fill plug lo-
cated on the inner side of the final
drive housing.
3.1
Turn the rear wheel until the fill
plug may be reached through a
disc brake opening.
______________
105
Содержание Can-Am RYKER 2019 Series
