BROWN HTS-3020 3000 Скачать руководство пользователя страница 10

Страница: 10 / 40

Equipment Safety

Recognize safety information

This is the safety alert symbol. When you see this symbol on your equipment or in this

manual, be alert to the potential for personal injury or injury to others.

Understand signal words

DANGER

indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury

WARNING

indicates a hazardous situation which, if not avoided, could

result in serious injury or death.

CAUTION

indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

NOTICE

indicates information considered important but not directly

hazard related. (e.g. security, hygiene, equipment or property damage).

Follow safety instructions

•

Read owner/operator manual.

•

Replace missing or damaged safety decals.

•

Safety decals and this manual must be considered a permanent part of your equipment.

•

Should ownership of the equipment be transferred, this manual must also be transferred.

•

Unauthorized modifications to the equipment are not recommended. This could impair the

function, safety, and life of the machine.

•

For any part of this manual that you do not understand, contact your dealer or Brown

Manufacturing Corporation at (800) 633-8909.

•

All implements with moving parts are potentially dangerous. Due to this fact, there is no

substitute for a safe, knowledgeable operator. It is important that all persons operating this

equipment read, understand, and follow the instructions provided in this manual.

CAUTION

WARNING

DANGER

NOTICE

DO NOT OPERATE THIS UNIT IF YOU ARE UNDER THE INFLUENCE

OF ALCOHOL, ILLEGAL DRUGS, OR ANY PRESCRIPTION OR OVER
THE COUNTER MEDICATIONS THAT COULD CAUSE DROWSINESS,

DIZZINESS, DISORIENTATION AND/OR IMPAIR YOUR ABILITY IN ANY

WAY TO SAFELY OPERATE THE UNIT.

DO NOT OPERATE THIS UNIT IF YOU SUFFER FROM ANY PHYSICAL CONDITION

OR DISABILITY THAT WOULD IMPAIR YOUR ABILITY TO OPERATE IT SAFELY.

Содержание HTS-3020 3000









































Результаты поиска

Содержание HTS-3020 3000

Отзывы:

Похожие инструкции для HTS-3020 3000

Бренды по названию

Популярные бренды

BROWN HTS-3020 3000, Руководство владельца/оператора

Результаты поиска

Содержание HTS-3020 3000

Отзывы:

Похожие инструкции для HTS-3020 3000

Бренды по названию

Популярные бренды