BROWN HTS-3020 3000, Руководство владельца/оператора

Страница: 5 / 40

TO THE OWNER/OPERATOR/DEALER
In addition to the standard Limited Warranty shown on the facing page, Brown Manufacturing Corp.
also provides:
1.) ONE-YEAR (12 months) {or 90 days for Commercial/Industrial Users} LIMITED WARRANTY
on the hydraulic drive components provided they have been properly maintained† and have not
been subjected to abuse or misuse.
2.) One year (12 months) LIMITED WARRANTY* on Bearing Block components provided they
have been properly maintained† and have not been subjected to abuse or misuse except as limited
below.
* WARRANTY LIMITATIONS - Bearing Block
A) Warranty is ONE-YEAR (12 months) for Seals (After one year, seals are considered to be
WEARING PARTS and replacement is user’s responsibility).
B) User’s Bearing Blocks may be rebuilt by Brown Manufacturing Corp. or replaced by new or
rebuilt Bearing Blocks at the option of Brown Manufacturing Corp.
† NOTE — “properly maintained” specifically includes, but is not limited to:
A) Running Bearing Blocks with the proper amount of the correct lubricant.
______________________________________________________________________________
To keep your implement running efficiently and safely read your manual thoroughly and follow
these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies
each section where you can easily find the information you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum
safety requirements of tractor operators:
REQUIRED OF THE OWNER:
1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard, and
2. Provide Seat belts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3. Ensure that each employee uses such seat belt while the skid steer is moving; and
4. Ensure that each employee tightens the seat belt sufficiently to confine the employee to the
protected provided by ROPS.
REQUIRED OF THE OPERATOR:
1. Securely fasten seat belt of skid steer.
2. Where possible, avoid operating the skid steer near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going — especially at row ends, on roads, and around trees.
6. Do not permit others to ride.
7. Operate the skid steer smoothly — no jerky turns, starts, or stops.
8. Hook up the Tree Saw properly and inspect all mechanical connections for proper fit.
9. When the skid steer is stopped, set brakes securely and use park lock, if available.
5