BROWN HTS-3020 3000, Руководство владельца/оператора

Страница: 20 / 40

Operation
20
Before hitching TreeSaw to your Skidsteer, make sure all safety devices are installed on
both the TreeSaw and the Skidsteer.
Please follow all safety instructions and procedures.
Attach Equipment to Skidsteer.
Be sure the Skidsteer is equipped with the correct attachment points. Be extremely careful
when positioning skidsteer for attachment to equipment. Do not allow personnel between
skid steer and equipment when positioning to attach.
Never allow anyone between the Skidsteer and equipment during the
hitching process.
Be certain that the TreeSaw has been lubricated properly and check grease level in bearing block
prior to use.
Adjust Cutting Height.
Be certain that Skidsteer engine is stopped, park brakes are set, key is
removed, and all rotation of the TreeSaw has ceased before dismounting
to making adjustments.
Your Brown TreeSaw is designed to cut at ground level, however for optimum blade and tip life adjust
to approximately 1” above ground level.
Herbicide Tank and Pump
Your Tree Saw is equipped with a 5 gallon spray tank and 12 volt electric pump for use with water
based herbicides. Please follow herbicide manufacturer’s directions for mixing ratios and treatment
amounts. The spray tip is adjustable from stream to mist. The pump is actuated remotely from
the cab. After the tree is cut, spray the stump to halt regrowth of the vegetation. The spray tip is
directly behind the blade, in a recessed guard.
STOP
CAUTION
WARNING