brown & sharpe Global 121510, Руководство пользователя, Страница: 91 / 144

Global Controls
Global User Manual
7-15
Controls
F1 (Function Key)
This button is not used at this time.
X, Y, Z BUTTONS
These buttons constrain the movement of the machine to the
selected axes when the joystick is deflected. Axes with illumi-
nated LED’s are active. When SHIFT is active, the upper register
X, Y and Z axes cannot be activated but the lower register A, B
and W axes can be activated, if available. The X, Y and Z axes
represent the axes of the machine. The A and B axes refer to the
A and B axes of the motorized wrist. The W axis refers to the
axis of rotation for a rotary table.
While the LOCK/UNLOCK key is held down, the axis LEDs
will indicate
which, if any, axes are locked (see the UNLOCK key). When the
SHIFT LED is on, pressing the Z Axis key will enable the W
axis and disable the Z axis, the function of the X and Y axis will
be the same whether or not the SHIFT LED is on or off.
PRINT
This button is used to interface with software commands/
prompts. This button is used to learn positional moves, enter
points or to continue program execution when prompted. When
learning positional moves or entering points, the coordinate
values at that location are recorded when “PRINT” is pressed.
The function of this button is software dependent.
DONE
This button is used to interface with software commands/
prompts. The DONE button is used to accept and register
software commands. The function of this button is software
dependent.