brown & sharpe Global 121510, Руководство пользователя, Страница: 24 / 144

System Set-Up
Global User Manual 2-8
11. Press ‘Machine Start” on the jog box to initiate the
homing sequence.
Starting the GC1 Controller
1. Check machine visually to ensure that all guards and
covers are in place
2. Verify that inlet supply pressure is at least 80 and
120 psi.
3. Turn on the air supply to the CMM and verify that
the pressure gauge reads 58 psi. If the pressure is not
correct, adjust it as outlined in the Pneumatic section of
this manual.
4. Verify that there are no obstacles which could pro-
duce a collision
5. Plug the workstation into a protected power strip.
6. Turn the power strip “ON”.
7. Turn the GC-1 control power switch to the “ON”
position.
8. Power up the computer and log on if necessary.
9. Start the measuring software, if it had not started
automatically.
10. When prompted, check that all emergency stop
buttons are unlatched, then press the MACH. START
button on the jog box.
11.The machine is now ready to start the homing se
quence.