4
─ OPERATION MANUAL ─
FOLDING ELECTRONIC FOOD THERMOMETER
This instruction constitutes a part of the product and should be stored in a manner allowing to read its contents
in the future. It contains significant information on the setting and operation of the device.
1.USE
1) Press ON/OFF to switch on the thermometer.
2) Unfold the metal probe.
3) Insert the probe into the food product whose temperature you want to measure.
4)
The display will show the temperature of the product in °C or °F.
5) For the perfect temperature for a given kind of meat, check the table on the back of the thermometer.
6) Press C/F to change the temperature measurement unit.
7) Clean the probe with a soft cloth using water with dishwashing liquid after each use.
2.ASSEMBLY AND BATTERY REPLACEMENT
1) Remove screws from the battery compartment cover
2) Insert a battery/ Remove a used battery and insert a new one correctly with regard to polarity (+ and -)
3) Replace the cover and screws.
NOTE!
Do not use inside ovens. This thermometer is intended for one-time measurement. It must be removed from the oven
after measuring the temperature.
- Do not put the
probe into temperatures exceeding 300°C
- Do not leave the probe on the grill or inside the oven after use.
- Do not insert the thermometer or probe directly into the water or under a stream of water.
- Wipe the thermometer probe with a damp cloth after each use.
3.TECHNICAL DATA
Measurement range:
-
10°C- 200°C (14°F-398°F)
Tolerance:
+/-
1°C
Accuracy:
0,1°C
Battery:
CR2032
Caution!
Every household uses electrical and electronic appliances, and thus is a potential source of waste, hazardous to humans
and the environment, due to the presence of hazardous substances, mixtures, and components in the equipment. On
the other hand, discarded equipment is a valuable resource from which raw materials like copper, tin, glass, iron, and
others can be recovered.
The symbol of the crossed out wheelie bin placed on the equipment, packaging, or documentation attached to
it, means that the product must not be disposed of together with other waste. The labelling simultaneously
means that the equipment was introduced to the market after the date of August 13th, 2005.
It is the responsibility of the user to transfer the used equipment to a designated collection point for proper
recycling. Information on the available collection system for electrical equipment can
be found in the shop’s information
and at the municipal office. Proper handling of discarded equipment prevents negative consequences for the
environment and human health!
