BW1254 User Guide v1.0
Nov. 2013
Page 58 of 184
Figure 81 –apply changes
Reboot
– click the button to restart the server and apply the changes
If there is no other settings needed to be modified, click the
Reboot
button to apply all
changes. If there are any other settings need to be changed, continuously to finish and
apply all changes and then click
Reboot
button to restart and take effect for all settings.
Wireless | Neighbor List
The neighbor list will scan neighbor access point to show the RSSI, channel…etc information in the
environment.
Figure 82 – neighbor list
Click
Scan 2.4G
or
Scan 5G
button.
SSID
– the SSID of scanned access point
MAC address
– the MAC address of scanned access point
RSSI(dBm)
– the RSSI of scanned access point(in dBm)
Channel
–the channel of scanned access point
Co-Channel
– display if the neighbor access point channel same with BW1254.[“Y”,yes/”N”,no]
Adjacent Interference
–display the neighbor access point channel adjacent to BW1254.[“Y”,yes or
“N”,no]. It is based on the neighbor within 4 channels of BW1254. For instance, if BW1254 channel is
6 then the neighbor access point will be marked “Y” if its channel is 2,3,4,5 or 7,8,9,10.