BW1254 User Guide v1.0
Nov. 2013
Page 141 of 184
HeartBeat Trap Interval
– define the interval that AP send trap information to the server.[in seconds]
Trap Configuration Table:
You can configure your SNMP agent to send
SNMP
Traps
(and/or inform notifications) under the
defined host (SNMP manager) and community name (optional).
Figure 249 – SNMP Trap table settings
Click
Add
to add a new SNMP manager or
Delete
to delete a specific SNMP manager. Clicking
Add
:
Figure 250 – Add SNMP Trap
Host IP
– enter SNMP manager IP address [dots and digits]
Host Port
– enter the port number the trap messages should be send through [number]
Trap Type
– select trap message type [v1/v2/inform]
Community
– specify the community name at a SNMP trap message. This community will be used in
trap messages to authenticate the SNMP manager. If not defined, the default trap community name
will be used (specified in the SNMP table) [1-32 all ASCII printable characters, no spaces]
Save
– save all current settings
Cancel
– restore the last settings
Services | NTP
NTP (Network Time Protocol) is used to synchronize the system time with the selected network NTP
server. Use the
Services | NTP
menu to configure the NTP service:
Figure 251 – NTP Settings
