BW1251
Nov 15, 2006
Browan
Page 58 of 72
System
System | Security
Use the
System | Security
service to configure the name and password of administrator:
Figure 66 – system security settings
User Name
– administrator username for access to BW1251 (e.g. web interface, CLI mode) [1-32
symbols, spaces not allowed].
Old Password
– old password value.
New Password
– new password value used for user authentication in the system [4-8 characters,
spaces are not allowed].
Confirm Password
– password confirmation to verify its accuracy.
Save
– saving new administrator settings.
Default administrator logon settings are:
User Name:
admin
Password:
admin01
Password length is from 4 to 8 characters.
After filling in the right Old password and the New Password, click the
Save
button to take effect
immediately.
After clicking
Save
button, the below UI will be shown to notify that the new password setting has
been taken place:
