BW1251
Nov 15, 2006
Browan
Page 28 of 72
Name
– specifying the new RADIUS server name used for selecting RADIUS server.
Server IP
– authentication RADIUS server IP address [dots and digits].
Server Port
– specifying the network port used to communicate with RADIUS [1-65535].
The default port value for authentication is 1812.
The default port value for accounting is 1813.
The port specified here must be the same with the one on the RADIUS server.
Secret
– shared secret string used to make sure the integrity of data frames used for authentication
server.
Save
– adding a new specified RADIUS server.
Cancel –
restoring all previous values
After adding a new RADIUS server or editing an existing one, the following control appears:
Figure 7 – Apply or Discard RADIUS Server Changes
Edit
– editing an existing RADIUS server settings
Delete
– deleting an existing RADIUS server settings
Click
Apply Change
to apply all the changes. Then the following page will appear:
Figure 83 – Reboot Server
Reboot
– restarting the access point to apply the changes
