Browan BW1251 Скачать руководство пользователя

Страница: 30 / 75

BW1251

Nov 15, 2006

Browan

Page 29 of 72

If there is no other setting needed to be modified, click the

Reboot

button to apply

all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click

Reboot

button to restart and apply all settings together.

Network | DHCP Settings

BW1251 can act as DHCP server or DHCP relay. The DHCP (Dynamic Host Configuration Protocol)
service is supported on layer 2 interfaces.

DHCP server and DHCP relay are disabled by default.

Figure 94 – DHCP Settings

Edit

– editing the wireless basic settings

To change DHCP setting properties click the

Edit

button, the DHCP server or DHCP relay service

should be configured:

Figure 10 – DHCP Settings

Status

– selecting the status from the drop-down menu.

Disabled

– disabling the DHCP server service.

DHCP Server

– enabling the DHCP server service.

DHCP Relay

– enabling the DHCP Relay service.

Choose DHCP Server to enable DHCP server service. Choose DHCP Relay to enable DHCP relay
service.

DHCP Server

This DHCP server service enables clients on the LAN to request configuration information, such as IP
address from the server. Settings of the DHCP service can be viewed just like the following page.

Содержание BW1251











































































Результаты поиска

Содержание BW1251

Отзывы:

Похожие инструкции для BW1251

Бренды по названию

Популярные бренды

Browan BW1251, Руководство пользователя

Результаты поиска

Содержание BW1251

Отзывы:

Похожие инструкции для BW1251

Бренды по названию

Популярные бренды