BW1251
Nov 15, 2006
Browan
Page 44 of 72
If wireless network environment is stable, which means auto channel selection isn’t
needed frequently, set a big value for DCA threshold to gain a stable wireless
users’ connection.
If wireless network environment changes continually, frequent auto channel
selection is needed, set a relatively small value for DCA threshold to let channel
change based on wireless environment.
Wireless users will be kicked off when DCA is processing (site survey and new
operational frequency channel takes effect).
DCA optional channel
– specifying the channels only in which auto channel selection (DCA)
chooses to reduce interference reference.
Only when DCA is enabled,
DCA threshold
and
DCA optional channel
will be
shown.
Layer 2 Isolation
– layer2 wireless client separation. Connected clients with user isolation function
enabled cannot access each other directly. The clients are isolated from each other using their MAC
addresses [enabled/disabled].
Mode
– two modes are supplied: AP mode and Bridge mode.
Change status or leave the default state if no editing is necessary and click the
Save
button.
Figure 47 – Apply or Discard Basic Wireless Settings with Static Channel selection
19 dBm
2 dBi
