Brouwer BTR 30, Руководство оператора и список запчастей

Страница: 13 / 36

MAINTENANCE
DRIVE CHAINS, REMOVE / REPLACE / ADJUST
FIG. 6
To adjust the Roller Drive Chain 1:
•
Loosen the Bolt 2 and Nut 3, this allows intermediate Spindle 4 to slide up or down.
•
Position a suitable bar/tool in the frame and against the bottom of the Intermediate
Sprocket 5.
•
Apply sufficient weight on the bar/tool in the direction of arrow ‘A’, to tension the Roller
Drive Chain 1.
•
Tighten the Bolt 2 and Nut 3.
To adjust the Intermediate Dive Chain 6:
•
Back-off the bolt in the Idler Adjusting Sprocket 7.
•
Apply pressure in direction of arrow ‘B’ to tension the Intermediate Chain 6.
•
Tighten the bolt in the Idler Adjusting Sprocket 7.
IMPORTANT
DO NOT OVER TENSION THE DRIVE CHAINS. THEY MUST NOT BE BAR TIGHT.
THIS WILL CAUSE PREMATURE CHAIN WEAR AND BEARING FAILURE.
LUBRICATE THE CHAINS WITH OIL. DO NOT USE GREASE.
Fig.6
8