Brother TD-2020A, Руководство пользователя

Страница: 21 / 98

Printing
15
2
d
On the printer, simultaneously press
and hold the (Print), (Feed),
and (Power) buttons until the
POWER indicator and STATUS
indicator blink in green alternately.
e
Release the (Feed) and (Print)
buttons (keep pressing the
(Power) button).
f
Change the connection mode by
pressing the (Print) button (keep
pressing the (Power) button). The
flashing indicator changes each time
you press the (Print) button,
toggling between connection mode.
g
Release the (Power) button when
both the POWER and Wi-Fi
indicators are lit in green:
• Using a Windows computer:
a. Launch the “ Printer Setting
Tool ” on your computer, and
click the Communication
Settings button.
b. Click the General tab, and in
the Selected Interface
section, select Wireless LAN .
c. Click the Wireless LAN tab
and in the Wireless Settings
section, select Infrastructure .
h
Launch the Printer Setting Tool on
your Windows computer, and click
the
Communication Settings
button. Click the Wireless LAN tab
and select Wireless Settings . Type
the SSID that you wrote down in
step 2, or click
Search and select the
SSID from the list that appears.
i
In the Passphrase field, type the
Password (Network Key).
NOTE
The information required here depends on
the authentication method and encryption
mode you are using; enter only the
information relevant to your network
environment.
j
Click Apply .
Both the POWER and the Wi-Fi indicators
will light in green when the connection
between the printer and your Wi-Fi router/
access point is established.
NOTE
To change any other network settings, use
the “
Printer Setting Tool ”.
Without Using a Wi-Fi Router/
Access Point (Wireless Direct)
2
Wireless Direct allows you to connect the
printer to your computer or mobile device
directly, without a Wi-Fi router/access point.
The printer serves as a Wi-Fi access point.
a
Make sure that the printer is turned off.
b
Confirm the Wireless Direct settings of
the Printer.
• Using a Windows computer:
a. Connect the printer and computer
using a USB cable.
b. Launch the “ Printer Setting
Tool ” on your computer, and click
the Communication Settings
button.
c. Click the General tab and in the
Selected Interface section,
confirm that Wireless Direct is
selected.