Brother PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer, Руководство по обслуживанию, Страница: 99 / 106

7
(14) E. Adjustment of half cut margins
* This mode is to adjust each margin amount of right and left ends to
±
0.5mm.
1) Mount the 36mm laminated tape cassette in the PT-9500PC and run the half cut operation
shifting the margins of both ends by 0.5mm from -1mm to +1mm.
2) Check that the sample result of half cut operation is proper. Then determine the position
where the margins at both ends are close to even.
3) Input the compensation value and click the OK button.
4) Check that each margin mount of both ends on the second sample printing is 1
±
0.5mm.
Fig. 7
(15) G. HG speedy printing (Skip this item if U.S.A. version.)
1) Mount the 36mm HG cassette in the PT-9500PC and run the HG speedy printing operation.
2) Check the printing length, the front and back margins and the printing quality of the printing
sample.
Fig. 8
(16) H. HG high resolution printing test (Skip this item if U.S.A. version.)
1) Mount the 36mm HG cassette in the PT-9500PC and run the HG high resolution printing
operation.
2) Check the printing length, the front and back margins and the printing quality of the printing
sample.
Fig. 9