Brother P-touch PRO DX PT-9200DX, Руководство по обслуживанию

Страница: 63 / 104

II-50
[
13]
Error Code
A list of error codes for the baud rate change wizard of PT-9200DX (related to
communications and connection) is shown below.
The language monitor displays the error number only.
Error
Number
Description Note
1 Failure to open COM
port The port is occupied by another application or a
serial communication device. Finish the application
or uninstall it, or delete the driver of the serial
communication device.
2 Get Comm failure Function failure at API level.
(API: Application interface)
3 Build Comm failure Function failure at API level.
(API: Application interface)
4 Set Comm Timeout
failure Function failure at API level.
(API: Application interface)
5 No applicable baud
rate This error is caused by complex factors actually.
The probable cause includes cable breakage,
conversion connector wiring, machine breakage,
and occupancy, concealment or internal
renumbering of port by another serial
communication device.
6 Failure to write baud
rate change
command Check if the power is shut down during operation or
the cable is disconnected or other causes related to
the power supply.
7 Failure to read baud
rate change
command Check if the power is shut down during operation or
the cable is disconnected or other causes related to
the power supply.
8 Build Comm failure Function failure at API level.
(API: Application interface)
9 Failure to write status
request during
confirmation Check if the power is shut down during operation or
the cable is disconnected or other causes related to
the power supply.
10 Failure to read status
request during
confirmation Check if the power is shut down during operation or
the cable is disconnected or other causes related to
the power supply.
50 Baud rate not
supported by PC The designated baud rate is not supported by the
PC. Set the baud rate at 9600.
99 Shutdown or
something related to
COM port Check the power supply. This error is sometimes
caused by complex factors. The probable cause
includes cable breakage, conversion connector
wiring, machine breakage, and occupancy,
concealment or internal renumbering of port by
another serial communication device.