1
2
3
4
5
6
7
8
57
T
R
OUBL
E
S
HOOT
IN
G
Error Messages
Block Limit! Max 5
Blocks
There are already five blocks of text. Limit the number of blocks to
five.
Length Limit!
The length of the label to be printed using the text entered is longer
than 1 m. Edit the text so that the length of the label is less than 1 m.
Insert 24mm Tape
Cassette!
A 24 mm tape cassette is not installed when Template or Block
Layouts for 24 mm tape is selected. Install a 24 mm tape cassette.
Insert 18mm Tape
Cassette!
A 18 mm tape cassette is not installed when Template or Block
Layouts for 18 mm tape is selected. Install a 18 mm tape cassette.
Insert 12mm Tape
Cassette!
A 12 mm tape cassette is not installed when Template or Block
Layouts for 12 mm tape is selected. Install a 12 mm tape cassette.
Insert 9mm Tape
Cassette!
A 9 mm tape cassette is not installed when Template or Block
Layouts for 9 mm tape is selected. Install a 9 mm tape cassette.
Insert 6mm Tape
Cassette!
A 6 mm tape cassette is not installed when Template or Block
Layouts for 6 mm tape is selected. Install a 6 mm tape cassette.
Insert 3.5mm Tape
Cassette!
A 3.5 mm tape cassette is not installed when Template or Block
Layouts for 3.5 mm tape is selected. Install a 3.5 mm tape cassette.
Too Much Text For
This Layout!
The maximum number of characters for the selected layout have
already been entered. Edit the text to use fewer characters or use a
different layout.
Text Too Long!
The length of the label to be printed using the text entered is longer
than the length setting. Edit the text to fit within the set length or
change the length setting.
Memory Full!
There is not enough internal memory available when you try to save
a label file. Delete any unnecessary files to make more memory
available for the new label file.
Check # of Digits
Entered!
The number of digits entered in the bar code data does not match the
number of digits set in the bar code parameters. Enter the correct
number of digits.
Input A,B,C or D At
Start&End!
The bar code data entered does not have the required start/stop
code (A, B, C, or D required at the beginning and end of the bar code
data for the CODABAR protocol). Enter the bar code data correctly.
Maximum Of 5 Bar
Codes Per Label!
There are already 5 bar codes entered in the text data when you try
to enter a new bar code. You can only use up to five bar codes in
each label.
Text Too Large!
The text size is too large. Select a different size option.
Select Other Cut
Option!
The tape length set using the tape length setting is shorter than the
total length of the left and right margins applied for the "Large
Margin" cut option. Select a different cut option.
Close Cover!
The rear cover is open. Close the cover when printing.
Message
Cause/Remedy
Содержание P-touch H500
Страница 62: ......