Brother P-touch H500 Скачать руководство пользователя страница 57

Страница: 57 / 62

TROUBLESHOOTING

Error Messages

When an error message appears on the display, follow the directions provided below.

Error Messages

Message

Cause/Remedy

Wrong Type Of
Adapter Connected!

An incompatible AC adapter is connected.

Use an appropriate AC adapter.

Low Battery!

The installed batteries are getting weak.

Replace Battery!

The installed batteries are about to run out.

Recharge Li-ion

Battery!

The battery is low. Please charge the lithium-ion battery.

Li-ion is damaged Use
other power source!

The Li-ion battery is damaged. Please use an AC adapter or an other

battery.

Unit Cooling Wait XX
min. before restart!

High temperature error.

Cutter Error!

The tape cutter is closed when you try to print or feed tape. Turn the

P-touch off and then on again before continuing. When tape is

twisted in the cutter, carefully remove the tape.

Insert Tape Cassette!

There is no tape cassette installed when you try to print or preview a

label, or feed tape. Install a tape cassette before continuing.

Text Full!

The maximum number of characters have already been entered. Edit

the text and use fewer characters.

No Text!

There is no text, symbols or bar code data entered when you try to

print or preview a label. Enter data before continuing.

Line Limit! Max 7
Lines

The maximum number of lines have already been entered. Limit the

number of lines to seven.

Incorrect Value!

The value entered for setting the tape length, multiple copies or the

numbering function is invalid. Enter a valid value for the setting.

Tape Cassette
Changed!

The tape cassette selected for printing is different from the tape

cassette installed in the P-touch.

Tape Width Limit!

Max 5 Lines

There are more than five lines of text when you press the

Print

Preview

key while using 18 mm tape. Limit the number of lines to

five, or replace with a larger width tape cassette.

Tape Width Limit!

Max 3 Lines

There are more than three lines of text when you press the

Print

Preview

key while using 12 mm tape. Limit the number of lines to

three, or replace with a larger width tape cassette.

Tape Width Limit!
Max 2 Lines

There are more than two lines of text when you press the

Print

Preview

key while using 9 mm or 6 mm tape. Limit the number of

lines to two, or replace with a larger width tape cassette.

Tape Width Limit!
Max 1 Line

There is more than one line of text when you press the

Print

Preview

key while using 3.5 mm tape. Limit the number of lines to

one, or replace with a larger width tape cassette.

Содержание P-touch H500































































Результаты поиска

Содержание P-touch H500

Отзывы:

Похожие инструкции для P-touch H500

Бренды по названию

Популярные бренды

Brother P-touch H500, Руководство пользователя

Результаты поиска

Содержание P-touch H500

Отзывы:

Похожие инструкции для P-touch H500

Бренды по названию

Популярные бренды