Brother NC-series Скачать руководство пользователя

Страница: 24 / 143

CHAPTER 1 NOVELL NETWARE CONFIGURATION

1-13

Configuring the Brother Print Server (Remote Printer Mode
using PCONSOLE and BRCONFIG

1. Make sure that the PSERVER NLM (NetWare Loadable Module) is

loaded on your file server.

2. Log into the file server from your PC workstation as ADMIN if you

are using NetWare 4.1x (if you want NDS support, do not login under
bindery mode). If you are using NetWare 2.xx or 3.xx, login as
SUPERVISOR.

3. Run the PCONSOLE utility from your PC workstation.

4. If you are creating a new print queue, select Print Queue

Information (NetWare 3.xx) or Print Queues (NetWare 4.1x) from
the Available Options menu.

5. Press INSERT, type in the desired print queue name (with NetWare

4.1x, you will also be asked for a volume name; press INSERT and
select the appropriate volume), and press ESCAPE to return to the
main menu.

The following steps apply to configuring a remote printer with
NDS support on NetWare 4.1x systems:

6.
a. Select Print Servers from the PCONSOLE menu and then select the

name of the PSERVER NLM on your host computer.

b. Select Printers.

c. Press INSERT to get Object, Class menu.

d. Press INSERT and enter the Printer Name (any unique name is OK).

e. Highlight the printer name and press ENTER twice to get Printer

Configuration Menu.

f. PCONSOLE will assign a Printer Number. Remember this number,

since it will be used later.

g. Highlight Print Queues Assigned and press ENTER and then

INSERT to get a list of available queues.

h. Highlight the name of the print queue you wish to assign to the remote

printer and press ENTER.

Содержание NC-series
















































































































































Результаты поиска

Содержание NC-series

Отзывы:

Похожие инструкции для NC-series

Бренды по названию

Популярные бренды

Brother NC-series, Руководство пользователя

Результаты поиска

Содержание NC-series

Отзывы:

Похожие инструкции для NC-series

Бренды по названию

Популярные бренды