USER’S GUIDE
1-10
14. Press ESCAPE several times until you return to the Available
Options menu.
15. Force the print server to rescan file servers for print jobs. You may
either turn the printer off and on again or you may down the print
server in PCONSOLE as follows:
•
In the Available Options menu, highlight Print Server
Information, and press ENTER.
•
Select the print server name (BRO_xxxxxx_P1) and press
ENTER. If you have NetWare 4.1x, highlight Information and
Status and press ENTER, and then skip to the next bullet.
If you have NetWare 3.xx or 2.xx:
- Highlight Print Server Status/Control and press ENTER.
- Highlight Server Info and press ENTER.
•
Push ENTER and then select Down and press ENTER again.
This will force the print server to rescan the available file servers
for new queue entries.
•
Alternatively, use the BRCONFIG or TELNET command
SET
NETWARE RESCAN
to make the print server rescan for file
servers.
Configuring the Brother Print Server (Queue Server Mode in
NDS mode) using PCONSOLE and BRCONFIG
1. Make sure that you are logged in as ADMIN in NDS mode on the
NetWare 4.1x file server.
2. Run the PCONSOLE utility from PC workstation.
3. Select Print Servers from the Available Options menu.
4. Press INSERT and enter the Print Server Name
✒
Note
Enter the Netware print server name of the print server exactly as it
appeared in the Netware tab of the BRAdmin (this will generally be the
BRO_xxxxxx_P1 default service name, unless you changed the name to
something else).
Important:
Do not assign a password to the print server or it will not log in.
