Wireless Configuration for Macintosh
®
57
5
p
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Authentication Method
and
Encryption Mode
from the pull-downs in each setting box. Then enter the
Network key
and click
Next
.
Note
• If you want to set more than one WEP key, click
Advanced
.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
q
Click
Next
. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel
.
Note
• If you want to manually enter the IP address settings of your machine, click
Change IP Address
and enter
the necessary IP address settings for your network. After making your selection, click
Next
and the Wizard
will search for available wireless networks.
• The control panel settings will be automatically changed to
WLAN
when the wireless settings are sent to
your machine.
