![Brother MFC-J2320 Скачать руководство пользователя страница 51](http://html.mh-extra.com/html/brother/mfc-j2320/mfc-j2320_basic-users-manual_54225051.webp)
Troubleshooting
43
B
Out of Memory
The machine's memory is full.
If a fax-sending or copy operation
is in progress:
Press
or
Quit
or
Close
and
wait until the other operations that
are in progress finish, and then try
again.
Press
Send Now
to send the
pages scanned so far.
Press
Partial Print
to copy
the pages scanned so far.
Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
(See Online User’s Guide.)
Print the faxes that are in the
memory.
(See Online User’s Guide.)
Paper Jam [Front]
Paper Jam [Front,Rear]
Paper Jam [Rear]
The paper is jammed in the machine. Remove the jammed paper by
following the steps. (See
If there is a repeat paper jam, try
another paper jam operation.
(See
Paper Tray not
detected
The paper tray is not completely
inserted.
Slowly push the paper tray
completely into the machine.
Jammed paper or a foreign object has
prevented the paper tray from being
inserted properly.
Pull the paper tray out of the machine
and remove the paper or foreign
object. If you cannot find or remove
the jammed paper, follow the steps.
(See
on page 49.) Slowly push the paper
tray completely into the machine.
Touchscreen Init.
Failed
The Touchscreen was pressed
before the power on initialisation was
completed.
Make sure that nothing is touching or
resting on the Touchscreen,
especially when plugging in the
machine.
Debris may be stuck between the
lower part of the Touchscreen and its
frame.
Insert a piece of stiff paper between
the lower part of the Touchscreen and
its frame and slide it back and forth to
push out the debris.
Error Message
Cause
Action