Troubleshooting
39
B
Data Remaining in
Memory
Print data is left in the machine's
memory.
Press
. The machine will cancel
the job and clear it from the memory.
Try to print again.
Disconnected
The other person or other person's
fax machine stopped the call.
Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the
Compatibility to
Basic(for VoIP)
.
Telephone Line Interference or
Document Jam/too Long
The document was not inserted or fed
correctly, or the document scanned
from the ADF was too long.
DR Mode in Use
(For some countries)
FaxAbility On
(For New Zealand)
(For some countries)
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from
Manual
to
another mode.
(For New Zealand)
The machine is in FaxAbility mode.
You cannot change the Receive
Mode from
Manual
to another mode.
(For some countries)
Set Distinctive Ring to
Off
.
(See Online User’s Guide.)
(For New Zealand)
Set FaxAbility to
Off
.
(See Online User’s Guide.)
High Temperature
The room temperature is too high.
After lowering the room temperature,
allow the machine to cool down to
room temperature. Try again when
the machine has cooled down.
Hub is Unusable.
A hub or USB flash drive with hub has
been connected to the USB direct
interface.
Hubs, including USB flash drives with
built-in hubs, are not supported.
Unplug the device from the USB
direct interface.
Image Too Long
The proportions of your photo are
irregular so effects could not be
added.
Choose a regularly proportioned
image.
Image Too Small
The size of your photo is too small to
trim.
Choose a larger image.
Error Message
Cause
Action