manualshive.com logo in svg

Brother MFC-9420CN, Руководство по обслуживанию

Поделиться
Скачать
Brother MFC-9420CN Скачать руководство пользователя страница 227

 8-20 

Confidential

 

8.1.4.13  Acquisition of White Level Data and CIS Scanner Area Setting (Function code 55) 

 Function 

This function allows the machine to obtain white level data for the CIS scanner and save it  

together with the CIS scanner area into the EEPROM on the main PCB. 

 

 Operating Procedure 

(1) Press the 

5

 key twice in the initial stage of the maintenance mode. 

The "SCANNER AREA SET" will appear on the LCD. 
The machine automatically obtains white level data. 

(2)  If this operation completes normally, the machine returns to the initial stage of the 

maintenance mode. 

If any error is noted, the "SCANNER ERROR" appears on the LCD.  To return the  
machine to the initial stage of the maintenance mode, press the 

Stop/Exit

 key. 

 

 

8.1.4.14  Paper Feeding and Ejecting Test (Function code 67) 

 Function 

This function allows you to check that a sheet of paper is fed and ejected correctly by  

printing the grid pattern on a page, whose interval is 1cm.

 

 

 Operating Procedure 

(1) Press the 

6 

and 

7

 keys in this order in the initial stage of the maintenance mode. 

The "SELECT TRAY1" will appear on the LCD. 
Choose " Tray1" or " Tray2" by pressing   or   key. 
The test printing is started, and the grid pattern is printed.

 

(2)  To return the machine to the initial stage of the maintenance mode, press the 

Stop/Exit

 

key. 

NOTE:

 In the case that the front cover is opened, or that there is no paper in the tray  

during test printing, the test printing is stopped.

 

 

Содержание MFC-9420CN













































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды