Brother KE-434C, Инструкция по эксплуатации

Страница: 77 / 83

17. MAKING THE FEED PLATE AND WORK CLAMP PLATE FOR INNER CLAMPING DEVICE
71
KE-434C,435C
17-4. How to make the work clamp plate
[Condition 1]
1. Align the stitch with reference point D which is 11 mm above the center of the screw hole in the work clamp plate.
2. Make the work clamp plate so that it is 1.5 mm smaller than the size of the seam.
3. Make a 1 mm bevel all along the side of the work clamp plate that does not have a ridge line.
[Condition 2]
1. Align the stitch with reference point E which is 9 mm above the center of the screw hole in the work clamp plate.
2. Make the work clamp plate so that it is 1.5 mm smaller than the size of the seam.
3. Make a 1 mm bevel all along the side of the work clamp plate that does not have a ridge line.
4. Then make a step of 0.5 mm as shown in the illustration.
[Condition 3]
1. Align the stitch with reference point F which is 6 mm above the center of the screw hole in the work clamp plate.
2. Make the work clamp plate so that it is 1.0 mm smaller than the size of the seam.
3. Make a 1 mm bevel all along the side of the work clamp plate that does not have a ridge line.
4. Then make a step of 0.5 mm as shown in the illustration.
Condition 1 Condition 2 Condition 3
2634Q
2637Q 2638Q
2636Q
2635Q
Work clamp