Brother HL-1870N Скачать руководство пользователя страница 68

Страница: 68 / 303

HL-1850/1870N SERVICE MANUAL

2-39

5.5.10 About emulation modes

This printer has the following emulation modes.

HP LserJet Mode

The HP LaserJet mode (or HP mode) is the emulation mode in which this printer emulates the

Hewlett-Packard LaserJet laser printer. Many software applications support this type of laser

printer. Using this mode will allow your printer to operate at its optimum performance with

those applications.

BR-Script 3 Mode

BR-Script is an original page description language and a PostScript language emulation

interpreter. This printer supports level 3. The BR-Script interpreter of this printer enables full

and satisfactory control of text and graphics on pages.
See the following commercial manuals for more technical information about PostScript

commands.

•

Adobe Systems Incorporated. PostScript Language Reference Manual, 2nd Edition.

Menlo Park: Addison-Wesley Publishing Company, Inc., 1990.

•

Adobe Systems Incorporated. PostScript Language Program Design. Menlo Park:

Addison-Wesley Publishing Company, Inc., 1988.

•

Adobe Systems Incorporated. PostScript Language Reference Manual. Menlo Park:

Addison-Wesley Publishing Company, Inc., 1985.

•

Adobe Systems Incorporated. PostScript Language Tutorial and Cookbook. Menlo Park:

Addison-Wesley Publishing Company, Inc., 1985.

•

Adobe Systems Incorporated. PostScript Language Reference Manual, third Edition.

Addison-Wesley Longman, Inc., 1999.

EPSON FX-850 and IBM Proprinter XL Mode

The EPSON FX-850 and IBM Proprinter XL modes are the emulation modes that this printer

emulates to meet the industry-standard for dot matrix printers of their respective manufactures.

Some applications support these dot matrix printer emulations. Use these emulation modes

for optimum performance when printing from those types of applications.

5.5.11 List of factory settings

The following table shows the initial factory default settings.

NOTE:

•

The settings are subject to the emulation mode. Effective modes are indicated in

parentheses in the following table.

•

The following settings cannot be restored to the factory settings with the RESET menu in

the FACTORY SETTINGS mode: INTERFACE MODE, HRC SETTING, PAGE

PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local language

for display messages.

•

The COPY setting is always restored to the factory setting when the printer is turned off

and on again.

•

It is not possible to reset NETWORK setting on the Control panel. If you wish to reset the

print server back to its default factory settings (resetting all information such as the

Содержание HL-1870N
















































































































































































































































































































Результаты поиска

Содержание HL-1870N

Отзывы:

Бренды по названию

Популярные бренды

Brother HL-1870N, Руководство по обслуживанию

Результаты поиска

Содержание HL-1870N

Отзывы:

Бренды по названию

Популярные бренды