Brother HL-1870N Скачать руководство пользователя страница 249

Страница: 249 / 303

HL-1850/1870N SERVICE MANUAL

6-63

8.7

Windows 95/98/Me (or later) Peer to Peer (HP JetAdmin Compatible Method)

Troubleshooting

If you are having trouble printing on a Windows 95/98 (or later) Peer to Peer network, check

the following (HP JetAdmin compatible method):
(1) If the print server does not show up under JetAdmin on a Windows 95/98 Peer to Peer

network, try removing all of the Windows 95/98 network software from the Network

Control panel and then reinstalling them as follows:

•

First install the IPX/SPX-Compatible Protocol (or the TCP/IP protocol if you are using a

later version of JetAdmin), the Client for Microsoft Networks, and the network adapter

card driver.

•

Install the Latest HP JetAdmin software

•

Restart the system, and then add the HP JetAdmin service.

8.8

Windows 95/98/Me/NT 4.0/2000 (or later) Peer to Peer Print (NetBIOS)

Troubleshooting

If you are having trouble printing on a Windows 95/98/Me/NT 4.0/2000 (or later) Peer to Peer

network (NetBIOS), check the following:
(1) Make sure that the Brother NetBIOS Port driver is securely installed and configured

according to the Windows 95/98/Me/NT 4.0/2000 Peer to Peer (NetBIOS) chapters. You

may find that during the installation of the port driver, the screen that prompts you for a

Port name is not displayed. This happens on some Windows 95/98/Me/NT 4.0/2000

computers. Press the ALT and TAB keys to make it appear.

(2) Make sure that the print server is configured to be in the same workgroup or domain as

the test of your computers. It may take several minutes for the print server to appear in

the network neighborhood.

8.9

Internet Print (TCP/IP) Troubleshooting

(1) The first step in troubleshooting is to make sure that you have a valid E-mail connection

on both the sending PC and the receiving print server. Try sending an E-mail message

from the PC to a user at the remote site who can receive mail via the POP3 server. If this

does not work, there may be an E-mail configuration problem on the PC, on the local E-

mail server, or on the remote POP3 server. Double check to make sure that the E-mail

parameters that you configured on the PC and on the remote print server match those

that are configured on the E-mail servers.

(2) If you can print small files OK but are having problems printing large files, the problem

may be in the e-mail system. Some E-mail systems have difficulties printing large files. If

the file does not reach its destination intact, then the problem is with the E-mail system.

(3) You can also enable the partial e-mail print facility on your client PC, this will split the e-

mail up into fragments which should then not overwhelm your e-mail server. To do this,

select the property dialog of the Brother Internet Print Port.

Содержание HL-1870N
















































































































































































































































































































Результаты поиска

Содержание HL-1870N

Отзывы:

Бренды по названию

Популярные бренды

Brother HL-1870N, Руководство по обслуживанию

Результаты поиска

Содержание HL-1870N

Отзывы:

Бренды по названию

Популярные бренды