Brother HL-1870N Скачать руководство пользователя

Страница: 181 / 303

CHAPTER 5 PERIODIC MAINTENANCE

5-6

3. PERIODICAL CLEANING

Clean the following parts periodically to avoid any printer problems or print image defects.

CAUTION:

While drum unit and scanner window cleaning basically can be implemented by the end user,

the electrical terminals inside the printer and on the drum unit should be cleaned by a service

technician. Instruct the users not to touch those terminals.

WARNING

There are high voltage electrodes inside the printer. Before cleaning the printer, make

sure that the power switch has been turned off and the power cord has been unplugged

from the power outlet.

3.1

Cleaning the Printer Exterior

Clean the printer exterior to keep the printer clean.

1) Turn off the power switch and unplug the power cord.
2) Wipe dirt and dust away from the printer exterior with a damp cloth and allow the printer

to dry completely before turning the power on again.

3) Plug in the power cord.

CAUTION:

•

Use water or neutral detergents for cleaning. Cleaning with volatile liquids such as thinner

or benzene will damage the surface of the printer.

•

Do not use cleaning materials that contain ammonia. They will damage the printer and the

toner cartridge.

3.2

Cleaning the Drum Unit

When replacing the drum unit or toner cartridge with a new one, be sure to clean the drum unit.

1)  Turn off the power switch and unplug the power cord.
2)  Press the cover release button, and then open the front cover.
3)  Pull out the drum unit assembly.

CAUTION:

It is recommended to place the drum unit assembly on a piece of disposable paper or cloth in

case you accidentally spill or scatter toner.

Содержание HL-1870N
















































































































































































































































































































Результаты поиска

Содержание HL-1870N

Отзывы:

Похожие инструкции для HL-1870N

Бренды по названию

Популярные бренды

Brother HL-1870N, Руководство по обслуживанию

Результаты поиска

Содержание HL-1870N

Отзывы:

Похожие инструкции для HL-1870N

Бренды по названию

Популярные бренды