Brother FAX-2950 Скачать руководство пользователя

Страница: 247 / 276

5-28

Confidential

1.3.18 Continuous print test (Function code: 67)

<Function>

This function is used to conduct paper feed and eject tests while printing patterns.

<Operating Procedure>

(1) Press the [6] and [7] buttons in this order in the initial state of the maintenance mode.

"PAPER FEED TEST" appears on the LCD, and continuous printing starts using a grid
pattern.

(2) When the [Stop/Exit] button is pressed, the operation is canceled, and the machine

returns to the initial state of the maintenance mode.

Note:

• Test printing continues until there is no paper in the tray. When the correct operation is

confirmed, press the [Stop/Exit] button to stop printing. (Printing is resumed when paper
is loaded in the tray.)

• In the event that an error occurs during test printing, continuous printing is suspended.

(If you do not press the [Stop/Exit] button, printing is resumed when the error is cleared.)

• To clear the error, remove the error factors, and then press the [Start] button.

Содержание FAX-2950





















































































































































































































































































Результаты поиска

Содержание FAX-2950

Отзывы:

Похожие инструкции для FAX-2950

Бренды по названию

Популярные бренды

Brother FAX-2950, Руководство по обслуживанию

Результаты поиска

Содержание FAX-2950

Отзывы:

Похожие инструкции для FAX-2950

Бренды по названию

Популярные бренды