manualshive.com logo in svg

Brother FAX-2950, Руководство по обслуживанию

Поделиться
Скачать
Brother FAX-2950 Скачать руководство пользователя страница 16

xiii

Confidential

To use the Machine Safely

Please keep these instructions for later reference and read them before attempting any 
maintenance. If you do not follow these safety instructions, there is a possibility of a fire, 
electrical shock, burn or suffocation.

 

WARNING

 ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. 
In addition, you could create an electrical short, which may create the risk of a fire.

 

There are high voltage electrodes inside the product. Before you access the inside of 
the product, including for routine maintenance such as cleaning, make sure you have 
unplugged the power cord from the AC power outlet, as well as Ethernet (RJ-45) 
cables (Network models only) from the product. Never push objects of any kind into 
this product through cabinet slots, since they may touch dangerous voltage points or 
short out parts.

 

DO NOT handle the plug with wet hands.

 

DO NOT use this product during an electrical storm.

 

Always make sure the plug is fully inserted. DO NOT use the product or handle the 
cord if the cord has become worn or frayed.

 

DO NOT allow this product to come into contact with water.

 

This product should be connected to an AC power source within the range indicated 
on the rating label. DO NOT connect it to a DC power source or inverter.

Содержание FAX-2950





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды