Brother ep44, Инструкция по эксплуатации

Страница: 10 / 58

I:%§é:i?lt-é§__1%£i
.
l
The above
operations
can
be
per-
formed
by
lines when in the line-
by-line mode.
NORMAL TERMINAL
Set the mode selector
to
NORMAL.
NP CP DP
E
Set the
PRINT/CAL
mode selector
to
NP
or
CF.
CAL -
Character corrections
(1) Press the
cursor
left
key (
:3
) and
move
the
cursor
to
the character
to
be
corrected.
NOTE: The
cursor
will continue
moving
to
the left if the
cursor
left
key(
;‘
3
)
is
pressed
and held down.
(2) Key in the
correct
character.
(3) After the correction
is
made,
press
the
cursor
right key ( )
and
move
the
cursor as
far
right
as
it will
go.
NOTE:
The
cursor
will continue
moving
to
the
right
as
long
as
the
cursor
right key ( ) is pressed. When the
cursor can
go
no
further, the
alarm will
beep.
Character
deletions
1. Using the delete key (delete
to
right)
(1) Press the
cursor
left key ( ) and
move
the
cursor
to
the character
to
be
deleted.
(2)
The character above the
cursor
will be deleted when the delete
key
( ) is
pressed.
(3) After the deletion
is
made,
press
the
cursor
right key (
E
) and
move
the
cursor
to
the
right end of the
display contents.
NOTE: Hold the delete
key ( ) depressed
to
continue
deleting characters
to
the right.
2. Using the backspace
key (delete to left)
Press
the
backspacekey
(:9;
) and the character
to
the left of the
cursor
will be
deleted.
T
NOTE: Hold the
backspace key
(
'Bs"3)
depressed
to
continue
deleting
characters
to
the left of the
cursor.
P
Character insertions
(1) Press the
cursor
left
key (
5:-J
) and
move
the
cursor
to
the
space
where the
character is
to
be inserted.
(2) Press the insert
key ( ). The
cursor
position will
not change
but will
flash in its
present
position
as
the display
enters
the insert mode.
(3)
If the insert
key is
pressed,
the
cursor
will
stop
flashing
and the insert
mode will be cancelled.
(4)
Key in the desired character.
the character above the
cursor.
(5) After the insertion is made,
press
the
cursor
right key (
Va
) and
move
the
cursor
to
the
right
end of the
displayed
contents.
NOTE: Characters
can
be inserted until the
right margin is reached when the
display
is in the insert mode.
If there
are already
15 characters in the
display, characters
cannot
be
inserted
at
the left end.
(However, insertion is
possible
when in the
line-by-line mode.)
The character will
be inserted
to
the left of
NOTE: