
4-4
Confidential
■
Firmware files installation for one model automatically
(1) Create and save a file for automatic firmware update under the USB flash memory.
Create a blank file of text format and title the file name “_@$UPD$OP0.8080”.
(2) Create the “FIRM” folder under the USB flash memory, and save the program file
needed for firmware install (ex: ******_A.djf) in the “FIRM” folder.
(3) Connect the USB flash memory to the USB flash memory port at the side of the machine
while the machine is in the ready state. “Program Updating.Do not turn off.” appears on
the LCD and installation starts automatically. Back light blinks during the installation.
(4) When installing is completed, the machine restarts automatically and “Completed...”
appears on the LCD. Remove the USB flash memory. If multiple program files are saved
in the USB flash memory, other installations start automatically after the restart.
If the installation fails, “Unable to Update:**” appears on the LCD. (“**” indicates the error
code.) Refer to the remedy and eliminate the error. Then reboot the machine and start
from the procedure (1).
■
Firmware installation using PC
<Operating procedure>
(1) If the computer and machine are connected with a USB cable, disconnect the USB cable
and enter the maintenance mode. (Refer to
“1.1 How to Enter Maintenance Mode” in
.)
(2) Connect the computer to the machine with the USB cable.
(3) Open the temporary folder, double-click the “Filedg32.exe” to start, and select “Brother
Maintenance USB Printer”.
(4) Drag and drop a necessary program file (ex: ******_A.djf) located in the same folder to the
Brother Maintenance USB Printer icon located within the FILEDG32 screen. The files are
sent to the machine and installation into the flash ROM is started.
(5) When installation is completed, the machine reboots and returns to the ready state.
(6) Turn OFF the power of the machine, and repeat the procedures (1) to (5) to install
necessary firmware.
(7) Turn OFF the power of the machine, and disconnect the USB cable.
<Firmware installation failure>
If the firmware installation fails due to “a power blackout during installing” or “the USB cable
was disconnected during installing”, turn OFF the machine and turn it back on. Then repeat
the procedure from (1) of <Operating procedure> above.
Memo:
You can install simultaneously the Sub firmware and Main firmware for one model.
However, if you save firmware for some different models to the USB flash memory, an
error will be occurred.
Memo:
• Be sure to reinstall the sub firmware and then the main firmware in this order.
• Do not disconnect the power cord, USB flash memory or USB cable from the machine or
computer during installing.
Содержание DCP-L3510CDW
