Brother 888-g80, Руководство по эксплуатации

Страница: 14 / 101

Names of Machine Parts and Their Functions
Basic operations B-3
GET
T
ING REA
D
Y
B
Needle and presser foot section
1
Needle bar thread guide
Pass the upper thread through the needle bar thread guide.
2 Needle plate
3
Needle plate cover
Remove the needle plate cover to clean the bobbin case and
race.
4
Bobbin cover/bobbin case
Remove the bobbin cover and then insert the bobbin into the
bobbin case.
5
Embroidery foot
The embroidery foot helps control fabric flexibility for better
stitch consistency.
6
Embroidery foot screw
Use the embroidery foot screw to hold the embroidery foot in
place.
Embroidery Unit
1 Embroidery frame holder
Insert the embroidery frame into the embroidery frame holder
to hold the frame in place. (page B-33)
2 Frame-securing lever
Press the frame-securing lever down to secure the embroidery
frame. (page B-33)
3 Embroidery unit connection
Insert the embroidery unit connection into the connection port
when attaching the embroidery unit. (page B-26)
4 Carriage
The carriage moves the embroidery frame automatically when
embroidering. (page B-26)
5 Release button (located under the embroidery unit)
Press the release button to remove the embroidery unit.
(page B-27)
b
a
c
d
e
f
CAUTION
• Before inserting or removing the embroidery
unit, turn the main power to OFF.
• After the embroidery frame is set in the frame
holder, be sure the frame-securing lever is
correctly lowered.
a
b
d
e
c