Brother 882-S85, Руководство по эксплуатации, Страница: 61 / 276

STITCH SETTINGS
Se
w
in
g Ba
sics
49
2
STITCH SETTINGS
When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length,
and upper thread tension. However, if needed, you can change any of the individual settings.
Setting the Stitch Width
Follow the steps below when you want to change
the zigzag stitch pattern width.
Example:
Press to narrow the zigzag stitch pattern width.
→
The value in the display gets smaller.
Press to widen the zigzag stitch pattern width.
→
The value in the display gets bigger.
Setting the Stitch Length
Follow the steps below when you want to change
the stitch pattern length.
Note
• Settings for some stitches cannot be changed (refer to the “STITCH SETTING CHART” at the end of
this manual).
• If you turn off the machine or select another stitch without saving stitch setting changes (see “Saving
Your Stitch Settings” on page 60), the stitch settings will return to their default settings.
Memo
• For an alternate method of changing the
stitch width using the speed controller, see
page 82.
Memo
• Press to return the stitch width to the
original setting.
Note
After adjusting the stitch width, slowly turn the hand-
wheel toward you (counterclockwise) and check that
the needle does not touch the presser foot. If the nee-
dle hits the presser foot, the needle may bend or
break.