manualshive.com logo in svg

Brother 882-D00, Руководство по эксплуатации

Брат 882-D00 - многофункциональный принтер для офиса. Ознакомьтесь с операционным руководством на {веб-сайте}, чтобы узнать, как использовать все функции этого устройства. Скачайте бесплатно руководство по эксплуатации для Brother 882-D00 прямо сейчас!

Поделиться
Скачать
background image

ERROR MESSAGES

A-30

OK to delete the setting?

This message appears when 

 or 

 is pressed to 

delete the settings for a utility stitch. To delete the selected 

settings, press 

.

Preventive maintenance is recommended.

This message is displayed when the machine needs to be 
maintained. (see page A-15)

Raise the buttonhole lever.

This message is displayed when the buttonhole lever is down, 
a stitch other than a buttonhole is selected, and the 
“Start/Stop” button or the “Reverse Stitch” button is pushed.

Sensor module error.

This message appears when something is wrong with the 
sensor unit of the machine. Consult your authorized dealer.

Set the clock.

This message appears when the time/date is not set. Set 
time/date. (see page B-20)

The bobbin thread is almost empty.

This message is displayed when the bobbin thread is running 
out.

The bobbin winder safety device has activated. Is the thread 
tangled? 

This message is displayed when the bobbin is being wound, 
and the motor locks because the thread is tangled, etc.

The ending point cannot be selected for this stitch.

This message appears when the function to specify the sewing 
end point cannot be used with the current stitch. Select other 
stitch. (see page B-69)

The needle position cannot be changed for this stitch.

This message appears when the function to specify the needle 
drop position cannot be used with the current stitch. Select 
other stitch. (see page B-69)

The needle will move. Keep your hands etc. away from the 
needle area.

This message appears when you touch the point closer than 2 
cm from the needle drop point with the sensor pen in the 
sensor function. (see page B-61)

The pockets are full. Delete a pattern.

This message is displayed when the memory is full and a 
pattern must be deleted.

The safety device has been activated.Is the thread tangled? Is 
the needle bent?

This message is displayed when the motor locks due to 
tangled thread or for other reasons related to thread delivery.

The shutoff support mode has been activated. Turn off the 
machine.

This message appears when the machine is in the shutoff 
support mode. Turn off the machine once to start the machine 
again. (see page B-28)

The “Start/Stop” button does not operate with the foot 
controller attached. Remove the foot controller.

This message is displayed when the “Start/Stop” button is 
pushed to sew Utility stitches or Character/Decorative stitches 
while the foot controller is connected.

The upper thread may not be threaded correctly. Thread the 
upper thread from the beginning. 

This message is displayed when it seems that the upper 
thread has not been threaded correctly.

The USB media was changed. Do not change the USB media 
while it is being read. 

This message is displayed when you attempt to select a 
pattern after the USB media in which the pattern is saved has 
been changed.

There is no needle plate cover. Attach a needle plate cover.

This message is displayed when the needle plate cover is not 
attached.

This file cannot be used.

This message appears if the file format is incompatible with 
this machine. Check the list of compatible file formats. (see 
page S-94)

This file exceeds the data capacity and cannot be used. Use a 
suitable size file.

This message is displayed when the file size exceeds the data 
capacity of the machine.
Confirm the file size and format. (see page S-95)

This function cannot be used while in the sensor mode.

This message appears when the selected function is not 
available with the sensor function. (see page B-59)

This key cannot be used at this time.

This message is displayed when you press 

 in 

the screen other than the Utility Stitch, or press 

 in the screen other than the Utility Stitch or 

Character/Decorative Stitch.

Marks

Error Messages

Cause/Solution

Содержание 882-D00

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 882-D00

Hagan Z01 Installation Instructions Manual preview
Z01
Бренд: Hagan Страницы: 6
FLIR Blackfly S Installation Manual preview
Blackfly S
Бренд: FLIR Страницы: 50
Riccar 734DE Instruction Manual preview
734DE
Бренд: Riccar Страницы: 22
Kärcher KM 70/30 C Bp Operating Instructions Manual preview
KM 70/30 C Bp
Бренд: Kärcher Страницы: 28
Numatic NR 1500 Owner'S Instructions Manual preview
NR 1500
Бренд: Numatic Страницы: 28
Singer 8768 Instruction Manual preview
8768
Бренд: Singer Страницы: 61
Olivetti Fax-Lab S120 Instructions Manual preview
Fax-Lab S120
Бренд: Olivetti Страницы: 64
Singer Futura 1100 Instruction Manual preview
Futura 1100
Бренд: Singer Страницы: 38
Singer 400W21 List Of Parts preview
400W21
Бренд: Singer Страницы: 50
JUKI CP-170 Instruction Manual & Parts List preview
CP-170
Бренд: JUKI Страницы: 34
Kenmore 385.11703 Owner'S Manual preview
385.11703
Бренд: Kenmore Страницы: 41
Kenmore 385.12102 Owner'S Manual preview
385.12102
Бренд: Kenmore Страницы: 69
Kenmore 385.15008100 Owner'S Manual preview
385.15008100
Бренд: Kenmore Страницы: 75
Kenmore 385.12912 Owner'S Manual preview
385.12912
Бренд: Kenmore Страницы: 79
Kenmore 385.12216 Owner'S Manual preview
385.12216
Бренд: Kenmore Страницы: 79
Kenmore 385.12318 Owner'S Manual preview
385.12318
Бренд: Kenmore Страницы: 83
Kenmore 385.12612090 Owner'S Manual preview
385.12612090
Бренд: Kenmore Страницы: 50
Kenmore 385.12514 Owner'S Manual preview
385.12514
Бренд: Kenmore Страницы: 45

Бренды по названию

Популярные бренды

Загрузить еще бренды