Brother 882-D00 Скачать руководство пользователя страница 44

Страница: 44 / 224

UPPER THREADING

B-42

Upper Threading

Press

→

in this order to display a video

example of the operation on the LCD (see page
B-33). Follow the steps explained below to
complete the operation.

Turn the main power to ON.

Press the “Presser Foot Lifter” button to
raise the presser foot.

→

The upper thread shutter opens so the machine can
be threaded.

Upper thread shutter

Press the “Needle Position” button to raise
the needle.

UPPER THREADING

CAUTION

• Be sure to thread the machine properly.

Improper threading can cause the thread to
tangle and break the needle, leading to injury.

• When using the walking foot, the side cutter or

accessories not included with this machine,
attach the accessory to the machine after
threading the machine.

Memo

• The automatic threading function can be

used with sewing machine needle sizes
75/11 through 100/16.

• Thread such as transparent nylon

monofilament thread and thread with a
thickness of 130/20 or thicker cannot be
used with the automatic threading function.

• The automatic threading function cannot be

used with the wing needle or the twin
needle.

Memo

• This machine is equipped with an upper

thread shutter, allowing you to check that
the upper threading is performed correctly.

Note

• If you try to thread the needle automatically

without raising the needle, the thread may
not thread correctly.

Содержание 882-D00

































































































































































































































Результаты поиска

Содержание 882-D00

Отзывы:

Похожие инструкции для 882-D00

Бренды по названию

Популярные бренды

Brother 882-D00, Руководство по эксплуатации

Результаты поиска

Содержание 882-D00

Отзывы:

Похожие инструкции для 882-D00

Бренды по названию

Популярные бренды