Brother 882-D00 Скачать руководство пользователя страница 68

Страница: 68 / 224

USING SENSOR FUNCTIONS WITH SEWING STITCH

B-66

Specifying the Needle Drop
Position With the Sensor Pen

Turn on the machine.

Select a stitch pattern.

Press .

→

The sensor functions screen appears.

Press .

→

The reference position setting screen appears, and
the red guideline marker flashes at the machine’s
sewing position.

With the sensor pen, touch the location to
be specified as the needle drop position.

→

The guideline marker moves to the touched position
and flashes.

→

The distance from the left reference line to the
touched position appears in the reference position
setting screen.

→

The stitch preview on the upper left side of the
screen is updated according to the specified setting.

Press to return the needle drop position to its
default setting.

Press to stop specifying a setting with the sensor
pen.

Note

• If

is not available, the sewing

reference position cannot be specified with
the selected stitch pattern. Select a different
stitch pattern.

Note

• The following error message appears if the

area outside of the sensor pen touch range

is touched. Press

, and then touch

within the sensor pen touch range.

Memo

• The position can be precisely adjusted by

touching the adjustment areas with the
sensor pen.

• To change the setting, use the sensor pen

to touch the desired location for the
reference position.

Содержание 882-D00

































































































































































































































Результаты поиска

Содержание 882-D00

Отзывы:

Похожие инструкции для 882-D00

Бренды по названию

Популярные бренды

Brother 882-D00, Руководство по эксплуатации

Результаты поиска

Содержание 882-D00

Отзывы:

Похожие инструкции для 882-D00

Бренды по названию

Популярные бренды