background image

200768_1 

 

23 

Your decorative gas stove, when installed in accordance with the installation instructions 
and operated in accordance with these instructions should provide many years of safe 
and efficient operation. 
 
Should you wish to claim under the warranty, please contact the supplier / dealer from 
whom you purchased the appliance. Do not claim directly to Broseley Fires, or Be 
Modern, as they are unable to process any direct claim from an end user.

 

 
We thank you for purchasing our product and trust it will provide excellent service. 
 
This appliance carries a guarantee of One (1) Year.   
 
We agree to repair free of charge or, at our option, replace the appliance or part thereof, 
which may prove to be defective within the guarantee period. 
 
The guarantee is void if: 
 

  The appliance is not installed and operated in accordance with our instructions, or 

  Repairs or modifications have been carried out by the purchaser or any third party 

not authorised by us or: 

  The appliance has been misused or accidentally damaged, or 

  Damage is due to ‘fair wear and tear.’ or 

  The appliance or defective component(s) are not returned to us, prepaid postage. 

  The appliance has not been serviced annually by a ‘Gas Safe Registered’ engineer. 

  
The rights given in this guarantee are limited to the UK mainland and are in addition to 
any to which you may have a statutory entitlement. 
 
Please retain your purchase receipt.  We will need to see this in the event of a claim 
under warranty. 
 

 

Broseley Fires Ltd, 

First Floor, 

Unit B Knights Court, 

Archers Way, 

Battlefield Enterprise Park, 

Shrewsbury, 

Shropshire, 

SY1 3GA 

Tel: 01743 461444 

Fax: 01743 461446 

http://www.broseleyfires.com 

 

 
 

Be Modern Ltd. 

19 - 34 Bedesway, 

Bede Industrial Estate, 

Jarrow, 

Tyne and Wear, 

NE32 3BE 

Tel: 0191 4898266  

Fax: 0191 4834148  

http://www.bemodern.co.uk 

 

Содержание DESIRE 5
























Отзывы: