19
Operation
Charging the battery pack
−
Charge the battery pack (26) only when all safety di-
rections are followed.
Charging the removed battery pack
−
Switch off the battery pack (26) (see „Switching bat-
tery pack on and off“ on page 16).
−
Remove the battery pack (26) from the mounting (31)
on the e-Bike (see „[Fig. 10] Inserting/removing the
battery pack“ on page 15).
N.B.: Set down the battery pack (26) only on clean sur-
faces. Avoid in particular any fouling of the charging
sockets (30) and of the contacts.
−
Insert the charging plug (32) of the battery char-
ger (33) into one of the two charging sockets (30) on
the battery pack (26).
→
The charging operation begins.
[Fig. 11] Charging the battery packs on the e-Bike
−
Switch off the battery pack (26).
−
Insert the charging plug (32) into the vacant charging
socket (30) on the battery pack (26).
→
The charging operation begins.
N.B.: Avoid any fouling of the charging sockets (30) and
of the contacts.
Charging in progress
Charging begins automatically as soon as the battery
charger (33) has been connected to the battery pack (26)
and the mains.
The battery pack (26) can be charged with and without
the display unit (1). Without the display unit (1), the
charging operation can only be tracked at the charge
level display (27) of the battery pack (26). The display
unit (1) can be removed during charging or fi tted only
after the charging operation has started. The charge
level is indicated by the charge level display (27) on the
battery pack (26) and by the bar (13) on the display
unit (1). During charging, the LEDs of the charge level
display (27) on the battery pack (26) come on (see
„Charge level display“ on page 15).
N.B.: Be careful when you touch the battery charger (33)
during charging. It can become very hot, particularly in
high ambient temperatures.
Once the battery pack (26) is fully charged, the LEDs go
out immediately. The charging operation is terminated.
−
Disconnect the battery charger (33) from the mains.
−
Disconnect the battery pack (26) from the battery
charger (33).
→
This switches off the battery pack (26) automati-
cally.
If the battery pack (26) is not disconnected from the
battery charger (33) after charging and the battery char-
ger (33) remains connected to the mains, it will switch
back on after a few hours, check the charge state of the
battery pack (26), and if necessary begin another char-
ging operation.
LED status displays
Battery charger 2 A
Standby
green LED steady
Pre-charge
green and red LEDs fl ashing
Charging in progress
red LED steady
battery pack full / trickle charge green LED steady
Battery test
green LED steady
Battery charger 4 A
Standby
Green LED fl ashing
Charging in progress
red LED steady
battery pack full / trickle charge green LED steady
Error
green and red LEDs fl ashing
Maintenance & cleaning
If the battery charger (33) is no longer serviceable, ple-
ase contact an authorized bicycle dealer.
Use a soft and dry cloth to clean the battery charger. Do
not use water or any other cleaning fl uids!
Disposal
Battery chargers (33), accessories and packaging
should be recycled in environment-friendly processes.
Do not dispose of battery chargers (33) as normal was-
te!
For EU countries only:
In line with European Directive 2012/19/ EU
on waste electrical and electronic equip-
ment and its implementation in national law,
chargers which are no longer usable must
be collected separately and recycled in environment-
friendly processes.
