12
The multifunctional panel (15) presents the following
information:
→
Clock time
→
Trip distance
→
Trip calories
→
Trip time
→
Trip average speed
→
Total kilometers
→
Total time
→
Pedal resistance
Changing over the measurement units
−
Switch off the display unit (1) using the On/Off but-
ton (8) (press it briefly for < 2 s).
−
Press the On/Off button (8) and the menu button (6)
simultaneously for > 3 s until the software version of
the display unit (1) appears in the multifunctional pa-
nel (15).
→
All displayed units are changed over between “km”
and “mi” and “km/h” and “mph” respectively.
Setting the clock time
−
In the multifunctional panel (15), change to the dis-
play of the clock time by pressing the menu but-
ton (6).
−
Press the menu button (6) for > 2 s.
→
The hour display flashes.
−
Set the hour display using the buttons “Raise assist
level” (18) and “Lower assist level” (20).
−
Confirm your entry using the menu button (6) or the
multifunctional panel button (19).
→
The minute display flashes.
−
Set the minute display using the buttons “Raise as-
sist level” (18) and “Lower assist level” (20).
−
Confirm your entry and leave the menu using the
menu button (6) or the multifunctional panel but-
ton (19).
Reset trip functions
To reset the displayed values of the trip functions in the
multifunctional panel (15), proceed as follows:
−
Select any trip function by pressing the menu but-
ton (6).
−
Press the menu button (6) for > 2 seconds.
→
All displayed values of the trip functions are reset
to 0.
Reset total time
To reset the displayed value of the “Total time” function
in the multifunctional panel (15), proceed as follows:
−
Select the “Total time” function by pressing the menu
button (6).
−
Press the menu button (6) for > 2 seconds.
→
The displayed value of the “Total time“ function is
reset to 0.
Basic functions
Your Brose e-Bike System has three assist levels (9).
Their characteristics are set out in the following table:
Description
Off
No motor assist. At the same time, cycling without any
resistance.
Cruise
Cyclist dominates, with perceptible assistance by the
motor.
Tour
Motor enhances the strength of the cyclist over-pro-
portionally (and yet sustainably).
Sport
Full delivery of the motor force with little effort by the
cyclist.
Setting the assist level
−
Press the button “Raise assist level” (18) on the con-
trol unit (16) to increase the assist level from OFF to
SPORT.
−
Press the button “Lower assist level” (20) on the con-
trol unit (16) to reduce the assist level from SPORT to
OFF.
N.B.: If the control unit (16) on your e-Bike has been in-
stalled reversed by 180°, then the button functions of
items 18 and 20 are reversed. It is always the button
with the arrow pointing in the cycling direction that rai-
ses the assist level.
Activating/deactivating the push-assist
The push-assist (11) is used for assistance when
pushing the e-Bike. It is activated as follows:
−
Switch the assist level to “OFF” to activate the push-
assist (11).
→
The arrow (10) is activated in the display of the
display unit (1) and signals that the push-assist (11)
is ready to operate.
−
Press the button “Lower assist level” (20) down for >
1 second to activate the push-assist (11).
→
This activates the symbol for the push-assist (11)
in the display unit (1).
→
The e-Bike accelerates without pedal assist to a
manufacturer-specified speed of between 3 and 6
km/h
−
Release the button “Lower assist level” (20) to deac-
tivate the push-assist (11).
Expanded functions
Light mode (14)
You can switch the lighting on or off manually, or select
the Automatic mode that automatically activates and
deactivates the lighting depending on the ambient
brightness.
−
Press the light button (7) to switch the light on or off.
−
Press the light button (7) for > 2 seconds to switch
the Automatic mode on or off.
