remote Battery installation
Remove the baTTERY COMPaRTMENT cover, located on the back
of the remote control .
Insert 2 aaa batteries according to the polarity indicators inside
the compartment .
Replace and secure the baTTERY COMPaRTMENT cover .
connecting the main unit
Connect the Power adapter to the DC jack on the back of the unit
and then plug the Power adapter into an electrical outlet .
Docking your iPod
1 . Pull the 30-pin connector towards you until it locks into position
(see illustration on the following page) .
2 . Insert your iPod/iPhone .
3 . Push back on iPod/iPhone until it rests on the backrest .
4 . “accessory Connected” will appear on your iPod/iPhone screen .
1 .
2 .
3 .
oPeraTion
13
