53
X-VA-MT3809G-MT3810G-eng/541B182AAG/A/2022-10
Brooks Instrument
Installation Manual MT3809G & MT3810G
Section 3 Operation
Operation of the Model MT3809 Flowmeter with a Transmitter with or without Optional Alarms and Pulse
Output for Totalization
*
Start-up the meter as described in Section 3-1.
* Programming performed prior to shipment (parameters).
The transmitter with or without alarms and pulse output is preprogrammed
prior to shipment for the following parameters based on the order
LQIRUPDWLRQPHWHUFRQ¿JXUDWLRQDQGDSSOLFDWLRQ,ISDUDPHWHUVDUHQRW
VSHFL¿HGLQWKHFXVWRPHUSXUFKDVHRUGHUWKHGHIDXOWVLQKHUHQWWRWKH
electronics will be as shown in (parenthesis).
Transmitter only
Transmitter plus
pre-programmed parameters
alarms and pulse output
preprogrammed
parameters
0RGHO1XPEHU
$ODUP/R/LPLW)6ÀRZ
6HULDO1XPEHU
$ODUP+L/LPLW)6ÀRZ
Tag Name (blank)
Pulse output units (1 ppl)
Flow Rate units of measure (lpm)
Resettable totalizer units of measure (lit.)
/RZ)ORZFXWRII)6ÀRZ
,QYHQWRU\WRWDOL]HUXQLWVRIPHDVXUHPHQW
(lit.)
Calibration factor (% scales only)
Analog Output LoRange
P$#ÀRZ
Analog Output HiRange
P$#ÀRZ
* Manual programming or reprogramming of the electronics.
Programming of the transmitter with or without alarms and pulse
output may also be done locally via an HART or
F
OUNDATION
Fieldbus
Communicator. Please refer to the manual of the communicator for
detailed description.
*
Recalibration of transmitter output (spanning high and low)
At any time after factory calibration, shipment, installation, or service,
the transmitter can be recalibrated by overwriting any of the previous
calibration point-pairs, assuming that the user can provide a series of
DFFXUDWHUDWHVRIÀRZWKURXJKWKHPHWHU,ISUHIHUUHGWKHPHWHUZLWK
transmitter may be returned for recalibration at the Brooks service
department for a fee.
*
Basic transmitter setup parameters
7KHVHDUHPHWHULGHQWL¿FDWLRQSDUDPHWHUVVHWSULRUWRVKLSPHQWRIWKH
meter.
)ORZPHWHULGHQWL¿FDWLRQ
Model number, serial number, tag name.
)ORZPHWHUFRQ¿JXUDWLRQ
/RZÀRZFXWRIIFDOLEUDWLRQIDFWRUÀRZUDWHXQLWV
of measure.
Transmitter analog output: Analog output HiRange, analog output
LoRange.
*
Optional programmable alarm and pulse output parameters and features
Alarm contact output: HiLimit, LoLimit
Latching or non-latching option shall be added for contact outputs.
$ODUPFRQWDFWRXWSXWVFDQEHFRQ¿JXUHGWRHLWKHUODWFKLQJW\SHRUQRQ
latching type.
