43
X-VA-MT3809G-MT3810G-eng/541B182AAG/A/2022-10
Brooks Instrument
Installation Manual MT3809G & MT3810G
Section 2 Installation
f) Common transmitter parameters are set during manufacturing at
%URRNV,QVWUXPHQWEDVHGRQRUGHULQIRUPDWLRQPHWHUFRQ¿JXUDWLRQRU
GHIDXOWVLQKHUHQWWRWKHWUDQVPLWWHU)XUWKHUGHWDLOHGFRQ¿JXUDWLRQVDV
well as on-line monitoring can be done through the F
OUNDATION
Fieldbus
communication protocol.See Foundation Fieldbus supplemental manual
(X-DPT-FF-MT3809G-Alarms-eng).
g) After installation and power up of the transmitter, the transmitter
must be zeroed, both electrically and mechanically. This operation
will compensate for any stray magnetic effects in the vicinity of the
transmitter.
Important
7KH]HURDGMXVWLQJRIWKHSRLQWHULQÀXHQFHVWKHWUDQVPLWWHU
LQGLFDWLRQEXWQRWWKHRWKHUZD\DURXQG7KHUHIRUH¿UVWDGMXVWWKHSRLQWHU
DWWKH]HURÀRZSRVLWLRQWKHQWKHWUDQVPLWWHUPXVWEH]HURHG
L)ORZPXVWEHYHUL¿HGWREH]HURGXULQJWKHHQWLUH]HURLQJ
LL:LWKWKHÀRZDW]HURDQGWKHÀRDWDWWKH]HURÀRZSRVLWLRQDGMXVWWKH
PHFKDQLFDOLQGLFDWRUWRSRLQWWRWKHµ5¶UHIHUHQFHOLQHXVLQJWKH
adjustment screw on the face of the pointer, next to the hub.
See Figure 2-10.
)LJXUH0HFKDQLFDO,QGLFDWRU=HUR
8VLQJDÀDWEODGHVFUHZGULYHUZLWKDEODGHKROGWKHSRLQWHUDQG
turn the screw to align with the “R” on the scale.
It may take a few adjustments to get the pointer on the “R”.
