Brooks EIB3018, Инструкция по эксплуатации

Страница: 43 / 60

43
Your Alarm does not
sound when you press the
Test button • Check the Alarm is secured correctly on the mounting plate.
• Wait 15 seconds after connecting the power before button testing.
• Hold button down firmly for at least 10 seconds.
• If the horn does not sound, then your Alarm must be returned for
repair or replacement - see “GETTING YOUR ALARM SERVICED” section
Your Alarm sounds for no
apparent reason • Follow the detailed instructions in section 5 and/or section 6
regarding the alarm condition.
• Locate the Alarm that sounds and has a flashing red LED.
• Identify the alarm type – Fire or CO (EIB3028)
•
For Fire :
- If you have thoroughly investigated and are sure that it is just a
nuisance alarm, simply press the Test/Hush button briefly to silence
the Alarm and any interconnected devices for 10 minutes. When
the Alarm is in ‘Hush’ mode the red LED will continue to flash while
it detects the presence of heat.
The Alarm will reset to normal functionality at the end of the 10
minute. If additional silenced time is required, simply push the Test/
Hush Button again.
- If you experience frequent nuisance/false alarms, it may be
necessary to re-locate the Alarm away from the source of the
fumes or if it continues to sound without smoke or heat being
present and cleaning the Alarm does not solve the problem, it needs
to be replaced