Broncolor Move 1200 L RFS 2, Руководство по эксплуатации

Страница: 6 / 28

8
IMPORTANT SAFETY INSTRUCTIONS
Before startup of your flash equipment, please read all the information contained in these opera-
ting instructions carefully. The safety instructions they contain must be strictly followed!
> Make sure you are thoroughly familiar with the operating instructions!
> Remove all transport protection and packing materials!
> Take special care of your equipment, particularly when there are children present! Never leave flash
equipment unattended!
> Like sunlight, flash light contains a certain amount of UV radiation! Using flash tubes or protecting
glasses that provide UV protection considerably reduces the undesirable side effects on skin and
eyes! Nevertheless, when taking pictures at close range, avoid exposing unprotected skin and eyes
to flashes! Eye contact with the light source should also be avoided! The maximum daily exposure
to UV radiation according to IEC 60335-2-27 / DIN 5031-10 is: 50 J / m
2
. This value must not be ex-
ceeded!
> The distance between a lamp and a person, or a lamp and an inflammable or heat-sensitive sur-
face must be at least 1 m to prevent damage due to thermal radiation!
> Switch off the power pack when connecting or disconnecting lamp plugs! The lamp plugs and sock-
ets have mechanical interlocks! When plugging in, ensure that the interlocks engage completely!
To unplug, push down the locking spring below the cable guide and pull the plug out of its socket!
> Prior to replacing flash tubes, halogen lamps, protecting glasses, and fuses, disconnect the lamp
from the power pack! Allow the lamp to cool down for 10 minutes before replacing a halogen lamp
or flash tube!
> broncolor flash light systems should only be equipped with original broncolor flash tubes, original
broncolor combustible and packing material, original broncolor accessories, and original broncolor
spare parts!
> broncolor power packs, lamps and accessories meet extremely high safety standards! When bron-
color lamps are connected to power packs from other manufacturers, or broncolor power packs
to other brands’ lamps and accessories, built-in safety measures may become ineffective. Due to
different design features and contact assignment of the lamp plugs of other brands, there may
even be hazards for the user. Our guarantee is invalidated by the use of such unauthorised combi-
nations, and we accept no liability for damage arising from such use.
> Use only lamps which are expressly approved for operation with this power pack!
> To minimise the risk of fire, electric shock, or injury to persons use exclusively accessories recom-
mended by the manufacturer!
> Check that the mains voltage corresponds to the information on the charger’s type plate!