Broncolor Move 1200 L RFS 2, Руководство по эксплуатации

Страница: 12 / 28

14
4. INFO DISPLAY
4 5
1 3 2
1 Energy level in joules or wattseconds
2 Total energy of both channels in f-stops
3 Flash time for each lamp (at t 0.1)
4 Shows the parameter setting (for details of menu navigation, see Chapter 7):
seq – displayed as soon as a sequence is selected in the menu
mod – shows the selected modelling light duration
st – displays the selected studio address for radio release
opt / min – displays the flash speed mode selected
5 State of battery charge display (13)
The display shows the approximate state of charge as follows:
The battery charge display blinks to indicate a low state of charge. Once the warning message
"Battery low" appears, the power pack is no longer available for use and must be recharged. All
settings are saved and the power pack switches off after two minutes.
Please note: batteries can only withstand a limited number of charging cycles. Battery life and
the number of charging cycles vary according to the type of use and the settings. Depending on
how the power pack is used, the actual working life of the battery may be shorter than given.
The manufacturer offers no guarantee regarding the number of flashes and charging cycles. You
will find further instructions under "Battery care and maintenance".
100 % 90 % 70 % 50 % 30 % < 20 %