background image

 

14 

Padding 

 
The chair is designed with removable padding. The 34 ounce healthcare vinyl fabric covering is 
manufactured to meet the following requirements: DIN 75 200/DIN 53 438; MVSS 302, M2;CAL 
117, and Wyzenbeck Heavy Duty Abrasion Test; has an antimicrobial, antibacterial, anti-stain and 
anti-static finish; Cold crack of -20ºC. Polyurethane foam meets CAL 117-2013. 
 
Removable seat and back pads are covered with an 8 ounce soft vinyl which meets CAN2-162 
flammability standard for hospital textiles. Polyurethane foam meets CAL 117-2013. Removable, 
washable, pre-shrunk fitted cotton terry covers are provided for the seat and back pads

 

 

Disinfection  

 
For normal cleaning we recommend the chair be wiped clean with soap and water. When 
necessary, a household strength diluted ammonia or chlorine based cleaner may be used. Metal 
parts and cushions should be wiped dry after cleaning.  
 

2.3 

Shipping and Storage Specifications 

 
BRODA Chair boxes should be shipped and stored in an upright condition and not stacked higher 
than 2 boxes tall. No other materials should be shipped or stored on top of a BRODA box. 
BRODA boxes should not be placed on pallets. 
 
BRODA Chairs should be shipped and stored at temperatures between minus 20 degrees 
Celsius and plus 40 degrees Celsius. BRODA Chairs should not be used until they are between 0 
degrees Celsius and 30 degrees Celsius. BRODA Chairs should be kept in a clean, dry 
environment.  
 
On receipt, we recommend that the shipping carton be immediately examined for damage. Any 
damage should be noted on the delivery receipt and a request for inspection by the transportation 
company should be made. The shipping carton should be opened immediately and the chair 
examined for concealed shipping damage. If the chair appears to be damaged, contact the 
customer service department at BRODA Seating. 
 

2.4 

Labels 

 
 

 

 

 

 
 
 
 

 

 
 

 
 

 
 

 
 
 

Weight Capacity Label 

Serial Number Label 
 

WEIGHT CAPACITY 

300 LBS. (114 kgs.) 

REFER TO OWNER’S MANUAL 

 

 

SEATING

 

1-800-668-0637 

PRODUCT # 
SERIAL # 

MADE IN CANADA 

 

 

Manufacturing Label 

 

Made in Canada 

SEAT TILT 

SQUEEZE HANDLE 

 

Tilt Label (Tan) 

Tracking Caster Label (Green) 

TRACKING  

CASTER 

Legrest Label 

LEG REST 

ELEVATION 

Содержание LT tilt























Отзывы: