Brocade Communications Systems Fabric OS v6.4 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 70

background image

Fabric OS Documentation Updates

11

53-1002063-09

Documentation updates for Fabric OS v6.4.0 and later

4

Add the following sub-section within the “Ports on Demand” section on page 378:

Displaying installed licenses

If a single license is installed that enables all Ports on Demand, the license will display as “Full
Ports on Demand license - additional X port upgrade license.” If there are other individual Ports on
Demand licenses installed, these will also be displayed when listing the licenses for a switch, and
you will see either “First Ports on Demand license - additional Y port upgrade license” or “Second
Ports on Demand license - additional Z port upgrade license.” In cases where there are multiple
Ports on Demand licenses, the total additional allowed ports will not exceed the total displayed for
the “Full Ports on Demand” license.

1. Connect to the switch and log in using an account with admin permissions.
2. Enter the licenseshow command.

switch:admin> licenseshow
SdSSc9SyRSTuTTdz:

First Ports on Demand license - additional 16 port upgrade license

SdSSc9SyRSTeXTdn:

Second Ports on Demand license - additional 16 port upgrade license

SdSSc9SyRSTuXTd3:

Full Ports on Demand license - additional 32 port upgrade license

In Table 78 on page 368, add the following entry:

Chapter 17, Monitoring Fabric Performance

In the section “Limitations of Top Talker monitors” on page 397, add the following item:

•

Fabric mode Top Talker monitors and FC-FC routing are not concurrently supported.

License

Description

ICL 16-link License, or Inter Chassis Links

Provides dedicated high-bandwidth links between to Brocade
DCX chassis, without consuming valuable front-end 8 Gbps
ports. Each chassis must have the ICL license installed in order
to enable the full 16-link ICL connections (Available on the DCX
only).
NOTE: It is possible to upgrade an ICL 8-link License on a DCX to

an ICL 16-link license by just adding a new ICL 16-link
License. In that case, the ICL 8-link License will be
retained and will also be displayed when listing licenses
for the product. Even though both 8-link and 16-link
licenses are present, no more than 16 links per ICL
connector are actually enabled.

Feature

License

Where license should be installed

Trunking on an HBA

Server Application Optimization and
ISL Trunking

Local switch

«
...
21
22
23
24
25
...
»

Содержание Fabric OS v6.4







































































Отзывы:

Нет отзывов

Похожие инструкции для Fabric OS v6.4

PT-D10000 Series

Бренд: Panasonic Страницы: 37

Бренд: IBM Страницы: 34

Linear-Phase MultiBand Software Audio Processor

Бренд: Waves Страницы: 27

Бренд: Xerox Страницы: 100

Network Shutdown Module V3

Бренд: Eaton Страницы: 65

Бренд: TC Electronic Страницы: 22

CLIENT LOGIN EXTENSION 3.7 - ADMINISTRATION

Бренд: Novell Страницы: 32

Бренд: Novell Страницы: 142

3CR15600 - Enterprise Management Suite

Бренд: 3Com Страницы: 218

POLICY MANAGER PROXY 2.0 -

Бренд: F-SECURE Страницы: 24

AUTOCAD ELECTRICAL -

Бренд: Autodesk Страницы: 16

Бренд: Autodesk Страницы: 22

46304-050008-1600A - Vault R4 Essentials Aotc

Бренд: Autodesk Страницы: 140

00126-050008-1620A - Autocad 2006 Essentials

Бренд: Autodesk Страницы: 235

256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010

Бренд: Autodesk Страницы: 1638

ARCHITECTURE 2010

Бренд: Autodesk Страницы: 4

Бренд: Lucid Страницы: 10

FM2A85X Extreme4

Бренд: Lucid Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды